Get a Grip With These Top 5 Best Bench Vise [March 2018]

What is the best bench vise for under $100? A quality bench vise is worth its weight in gold. Useful for holding many types of materials from wood to pipe and just about everything in between. But can you get a good quality bench vice for under $100? In this post, we will take a look at 5 bench vices under 100 bucks. Four of them suitable for woodworkers and one a general purpose bench vises.

Our Top Pick – Yost M7WW Rapid Acting 7-inch Wood Working Vise

This is another excellent woodworking bench vise designed for the home craftsmen. The Yost M7WW has a couple of features that make it ideal for your woodworking bench.  This bench vise is designed with a rapid action lever that allows for quick opening and closing of the vise.

It is built using 30,000 PSI gray iron casting resulting in an extremely durable and strong bench vise. Buttress thread offer increased clamping pressure so your workpiece is going to hold tight. The bench doh allows for gripping workpieces that are over-sized.

The YOST Woodworking Vise comes with pre-drilled holes for quick mounting to your workbench. You can also mount wood facing into the jaws with the pre-drilled holes in the jaw. The jaw width is 7-inches and the jaw opening is 8-inches. This bench vise weights 21 pounds which might make it a bit of a challenge to mount for some folks.

Overall the Yost M7WW is an excellent bench vise under $100.

The Yost LV-4 Home Vise 4-1/2″ Bench Vise

The Yost LV-4 is a swivel base vise that is well suited for the home workshop. It has a 4 1/2-inch base and is manufactured from cast iron. It features include a steel vise jaw, threaded spindle, and a lockdown. The base has been improved to reduce any side to side movement.

You can rotate the base up to 240-degrees in order to position that base. There are built-in pipe jaws that will allow you to hold small pipes and tubes ranging in diameter from 0.6″ to 1.85″ diameter.

The base has 4 mounting holes with 3/8-in bolts as the recommended size by Yost. The Yost LV-4 is painted in a durable blue powder coat. This bench vice weight about 10 pounds.

Irwin 226361 6 1/2 InchWoodworker’s Vise

The Irwin 6 1/2-inch bench vise is ideal for woodworkers. It is designed with a slight toe-in at the top to ensure a workpiece is held firmly in the vise. Due to its square body seating it is is easy to under-bench mount.

This bench vise allows you to install wooden checks to help protect workpieces from getting damaged. It is an excellent light-duty bench vise with a nice sized 4 1/2-inch jaw capacity. It is made from durable forged steel. The vise weight about 5 1/2 pounds. It does turn a little rough due to the coarse screw but this is not a big issue for many.

There are no instructions that come with this Irwin vise, and for some, it was a little hard to mount. Overal lit is relatively inexpensive and will work just fine for many general use purposes.

TEKTON 6-1/2-Inch Woodworking Vise

The Tekton woodworking vise is an excellent bench vise that just works like it’s supposed to. It is made of cast iron rated at 30,000 PSI with a nice powder-coated finish. The jaws are pre-drilled so you can add custom jaw pads if you like.

The sliding t-bar handle is chrome-plated along with the steel guide rails. The acme-threaded screw allows for smooth gliding without any binding. This bench vise for not have a quick release but for some, that is not a deal-breaker. The jaw opening is 4 1/2-inches. It weighs a little over 5 1/2 pounds so it not extremely heavy. It comes pre-drilled flush with 1/4-inch mounting holes.

About the only complaint seems to be the mounting could have been better designed. Overall, however, the Tekton woodworking vise is a good value and one that you should consider.

Big Horn 19309 – 7 Inch Woodworkers Bench Vise

The Big Horm 7-inch woodworking bench vise is a solid performer. It features toe-in jaws for a firm grip on your workpiece. It has pre-drilled holes for mounting to your bench and is made from durable cast iron.

It has a quick release action for ease of operation. The two steel guide rods are designed to reduce wear and provide smooth action. The main screw has a quick action Acme thread. The jaw opening is 7 7/8-inch, the jaw width is 6 3/4-inch and the jaw height is 2 1/2-inch. This Big Horn 19309 weighs in at about 21.5 pounds.

Best Bench Vise Wrap-Up

The Yost bench vises in our opinion offer excellent value and durability. The company has been around for a long time manufacturing quality products. That why our Top Pick is Yost Rapid Acting Wood Working Vise. It’s a great bench vise under $100.

In this video, you will see a demonstration of how to install one of the Yost bench vise.

Additional resources:

Want to know which cordless jigsaw is the best? Take a look at our cordless jigsaw review. If you would rather just learn about jigsaw and what makes it one of the most versatile tools in your workshop read our jigsaw buying guide.

Last update on 2018-06-24 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment