How to Prevent Rust on Woodworking Tools (Fully Explained)


Rust prevention on woodworking tools is very vital due to their relatively higher cost. To increase productivity and get value from your tools, you must take good care of them.

A more considerable amount of tools used in most woodworking workshops are made of varying types of metal, and if not well maintained, they are prone to rust, especially when exposed to moisture.

Although some tools may be used after mild rusting, they won’t serve you for long as they will be rendered useless within no time. Additionally, rusty tools look pretty unappealing.

So, to avert rust from stripping your woodworking tools of their functionality, below are practical and helpful hacks you can try:

Frequently use your Tools

By and large, the most straightforward strategy to prevent your woodworking tools from rusting is by making maximum use of them. Using your tools more often reduces the chances of them collecting moisture and dust, both of which are significant causes of rusting.

Reduce Moisture and Control Humidity

Controlling humidity and moisture is probably one of the most vital mechanisms that you can put in place to protect your woodworking tools from rust.

To achieve this, your workshop should be ventilated well. However, if you mainly live in a humid climate and your workshop doesn’t get sufficient airflow, it will be ideal to invest in a dehumidifier of a fan.

A well-spaced and well-ventilated workshop will help avoid congestion of tools in one corner and help ensure that your tools are not exposed to rust-causing elements.

Arrange your Woodworking Tools Appropriately

To prevent your woodworking tools from rust, you should keep your workshop organized and neat. It would be best if you separated power tools from hand tools. You avoid placing your tools on the floor as this could expose them to moisture and dust. Ideally, you could put them on the shelves or hang them on the wall.

Install a Dust Collector

Dust is a potential cost of rust to your woodworking tools. As you undertake various projects in your workshop, sawdust is always produced, which could make your workplace messy and dusty. To avoid this, it would be ideal if you installed a dust collector in your workshop.

Additionally, you should always sweep and eliminate sawdust.

You could also place a slightly wet mat under your workbench; this helps trap dust as you work. Chances of your woodworking tools being exposed to dust will be significantly reduced.

Use Silica Gel Packs

Another approach to prevent rust on your woodworking tools is by placing silica gel packs in your tool chest, toolbox, and in any place that you store your hand tools. Although silica gel packs are often used in new shoe boxes, you can use them in your workshop to absorb moisture.

They are pretty simple to use, toss some in your toolbox, and you wouldn’t have to worry about rust in your woodworking tools.

However, it is important to note that they should be “recharged” more often; you will need to bake them for at least three hours in your oven at 240 degrees Fahrenheit.

Regularly Wipe your Woodworking Tools

As you undertake your various woodworking projects, you must regularly wipe your woodworking tools to eliminate dust and moisture. This practice will go a long way in ensuring that your hard-earned tools are not exposed to rust-causing elements.

Apply Protective Coatings

This is one of the most practical and effective strategies to inhibit rust. You are required to apply a tinny layer of non-oxidizing oil on your woodworking tools, including mineral oil. WD-40 and motor oil are also used by some woodworkers to achieve the same result.

However, it is essential to note that dust is attracted by oil; thus, you still need to conduct regular tool maintenance even after smearing a protective layer like oil. If you do not prefer oils as your rust-protection preference, you should consider paste as another worthwhile option.

How to Remove Dust from your Woodworking Tools

Unfortunately, if you fail to maintain your tools regularly, they will be exposed to rust. Fortunately, there are a number of ways that you could use to remove rust from your tools:

Use Vinegar

Vinegar is one of the ideal ways to get rid of rust from woodworking tools. Its all-natural and powerful elements offer a means to remove rust even on thicker surfaces.

You can directly smear the vinegar to your tools or sock a duster with it and scrub. The point is to let the vinegar get in contact with the rusted surface and adequately soak in there. Upon scrubbing, the rust is expected to come off quite nicely.

Use Rust Remover Chemical

Rust remover agent including Evapo-Rust to remove rust from the surface of your woodworking tools. You are required to apply this chemical on the rusted surface and let it soak in. After some minutes, you should scrub it, and the rust will come off.

When using this method, you are supposed to quickly smear rust inhibitor on your tools to reduce the chances of rust reoccurrence.

Sanding Block

Sanding blocks is one of the best remedies in getting off the rust from your wood cutting tools. Apart from being powerful, it can get into finer areas where rust could build up fast. Sanding blocks could be applied directly to the woodworking tools.

However, it would be best if you were keen not to hit the actual coating as this could damage your tools.

It is essential to note that the sanding blocks should get deep on the rusted surfaces and connect adequately before scrubbing them.

Bottom Line

As you consider using the above hacks and tips, it’s vital that you keep in mind that rust on your woodworking tools is inevitable, and any approach you use is merely a short-term preventive measure.

To increase the durability of your tools, you need to take care of them by conducting regular maintenance. It would be best if you made it a habit always to wipe your tools to eliminate any traces of dust or moisture which could expose them to rust.

Sources

Rust prevention on tools

Keep your tools safe from rust

How to prevent rust on your tools

Sokna Chan

Welcome to WoodWorkingToolsHQ.com Carpentry is my passion. I understand that it can be challenging for those seeking to venture into this industry, especially if you are a novice. I hope you enjoy and get a lot of ideas from my website. Thank you so much for your time.

Leave a Reply

Your email address will not be published.

Recent Posts