Vinegar is made from acetic acid and trace compounds that may contain different flavors. But all Vinegar typically contains 5–8% acetic acid by volume.
And that acidic property is the key factor in removing the paint.
The acetic acid property of kinds of vinegar is usually produced by a double fermentation process; yeast converts simple sugar to ethanol and acetic acid bacteria convert ethanol to acetic acid.
How to use vinegar to remove paint.
Step.1 Prepare Vinegar Solution- First you will need to prepare a vinegar solution. Heat 0.25 ounces of your white vinegar in a safe container. Let it simmer in approximately 0.25 – 1 cup of water. You can mix other cleaning agents with the vinegar solution for an increase in strength. Baking soda is one of the products you can use.
After boiling and preparing the mixture. Cool down the mixture by turning off the heat source.
Step. 2 Dampen a cloth- Dip a cotton cloth into the mixture of vinegar Or you can use a paintbrush as well. After dampening, squeeze some mixture out.
Step.3 Applying vinegar- Using your heated vinegar as our next step, we will remove the paint completely. Cover the identified paint using warm vinegar by using a damp cloth. It takes about 10 to 15 minutes for the paint to melt down after being soaked.
Usually, the paint will peel off or will be softened on the first attempt. In case it does not work. Repeat the process to clean off the paint thoroughly.
Step.4 Use a scraper to peel off the paint- At this point, conversely after leaving the paint for about 20 minutes. It should get softened. Now you can move on to the next step, which is using a scraper to scratch the painted surface.
If you apply just gentle pressure and make a few quick motions, there will be no significant damage to the surfaces. Depending on how stubborn the paint is, you may need to soak the swab in more vinegar.