When it comes to power tools, DeWalt is a name that stands out for its quality and reliability.
Two of their popular reciprocating saws, the DeWalt DCS382 and DCS367, often find themselves in the spotlight.
But which one is the better choice for your needs?
Hottest Deals On Amazon That You Must Know
My personal Experience: In a nutshell, I’d lean towards the DCS367. Why?
Well, it’s a bit like comparing a sedan to a sports car. The DCS367 packs a bit more punch with its higher amp rating, making it my top pick for heavy-duty cutting tasks. The reduced vibration and noise levels are just cherries on top, especially during those marathon projects.
Buy DCS367 From Amazon At The Best Price
Don’t get me wrong, the DCS382 is a solid performer too, but if you want that extra kick and a smoother ride, the DCS367 is the way to go. Trust me, your hands and ears will thank you.
Buy DCS382 From Amazon At The Best Price
In this blog post, we’ll break down the seven key differences between these two saws and help you make an informed decision.
| Feature | DeWalt DCS382 | DeWalt DCS367 |
|---|---|---|
| Motor Type | Brushed | Brushless |
| Strokes Per Minute | 2,900 SPM | 3,000 SPM |
| Weight | 6.2 pounds | 5 pounds |
| Length | 15.9 inches | 14.5 inches |
| Battery Compatibility | DeWalt 20V MAX batteries | DeWalt 20V MAX batteries |
| Tool-Free Blade Change | Yes | Yes |
| Price | Budget-Friendly | Slightly Higher |
| Vibration Control | Limited | Enhanced |
| LED Light | Yes | Yes |
| Blade Length Compatibility | Various | Various |
| Additional Features | Basic | Four-Position Blade Clamp |
| Warranty | Dependent on Region/Distributor | Dependent on Region/Distributor |
Table of Contents
Introduction: Why DeWalt Dominates the Reciprocating Saw Market
After years of daily use on job sites—cutting through everything from old cast-iron pipes to nail-embedded studs and tree roots—I’ve developed strong opinions about what makes or breaks a reciprocating saw.
DeWalt’s 20V MAX lineup has been my go-to platform, and two models stand out as the most frequently debated: the DCS367 (compact one-hand) and the DCS382 (full-size standard).
These aren’t just incremental updates of the same tool. They represent two fundamentally different philosophies about how a reciprocating saw should perform.
I’ve run both through identical torture tests, used them on real renovation projects, and pushed their batteries to the limit. This comparison comes from actual hands-on experience, not spec-sheet reading.
Size, Weight, and Ergonomics: The First Thing You Notice
DCS367: The Lightweight Contender
The moment you pick up the DCS367, the difference is obvious. At approximately 14.5 inches in length and weighing around 3.6 lbs (bare tool), this is a genuinely one-handable reciprocating saw.
The grip circumference is smaller than traditional models, and the balance point sits right where your palm meets the fingers—exactly where you want it for single-handed operation.
I’ve used this saw overhead for hours cutting conduit and junction boxes. The fatigue factor is remarkably low compared to full-size models. The rubber overmold is aggressive and textured, giving you confidence even with sweaty or gloved hands.
The pivoting shoe is metal (not plastic) and adjusts without tools—something I appreciate when I’m wedged into an attic crawlspace and need to stabilize the blade against the workpiece.
Real-world note: The compact size means you can slip this into a standard tool bag pocket, not a dedicated saw case. For service electricians and maintenance techs who carry minimal gear, this matters.
DCS382: The Full-Size Workhorse
The DCS382 is a traditional reciprocating saw profile. At roughly 17.7 inches and about 5.8 lbs (bare tool), it’s in the same weight class as corded models but without the cord.
The heft is immediately noticeable—this feels like a demolition tool, not a precision instrument.
The anti-vibration system is where DeWalt invested their engineering. After cutting through 20 consecutive 2×4s with embedded drywall screws, my hands weren’t numb—a common problem with older cordless recip saws.
The fixed shoe is longer and more robust than the 367’s, providing better stability when you’re leaning into a cut with full body weight.
The D-grip handle is thicker and more substantial. For two-handed operation (which is how you’ll use it 90% of the time), the secondary grip position near the front gives you excellent leverage and control when plunge-cutting into walls or flooring.
The trade-off: You’ll know this tool is in your bag. It’s not something you casually carry for “just in case” scenarios.
Power and Performance: Motors, Strokes, and Real-World Cutting
Motor Architecture and Stroke Mechanics
The DCS367 runs a brushless motor with a 1-1/8 inch stroke length and delivers up to 2,900 strokes per minute (SPM) at the top of its variable speed range. The brushless design isn’t just marketing—it genuinely extends runtime and prevents the motor from bogging down in dense materials. I’ve buried this saw in wet pressure-treated 4×4s, and while it slows, it doesn’t stall.
The DCS382 also uses a brushless motor but with a longer 1-1/4 inch stroke length and a higher top speed of 3,000 SPM. That extra 1/8 inch of stroke length doesn’t sound like much, but in practice, it means more teeth engaging the material per pass and faster chip clearance. The result is noticeably faster cutting in thick, dense materials.
Variable Speed Triggers and Control
Both saws feature variable speed triggers, but the DCS382’s trigger is more progressive. The 367’s trigger can feel a bit “on/off” at low speeds—fine for notching, but harder to feather for delicate starts. The 382 allows for genuinely slow, controlled starts, which I value when cutting into finished surfaces where I want to avoid “jumping” the blade at startup.
Blade Change Systems: Lever vs. Twist
The DCS367 uses a keyless lever-action blade clamp. Pop the lever, insert the blade, release. It works with both standard and specialty reciprocating saw blades. In dusty environments, I’ve had the lever mechanism get gritty, requiring a quick blow-out with compressed air.
The DCS382 uses DeWalt’s Quick-Change blade release—a twist-and-lock collar system. It’s faster once you get the muscle memory down, and it seems less prone to jamming with drywall dust. Both accept universal shank blades, so you’re not locked into proprietary blade ecosystems.
Battery Performance and Runtime Reality
Real-World Runtime Testing
I tested both saws with identical DeWalt 20V MAX 5.0Ah batteries (DCB205) on a standardized cutting task: 100 linear inches of 2×10 pressure-treated pine.
- DCS367: Completed the task with battery indicator still showing 2 bars. Estimated remaining capacity: ~40%. The compact motor draws less current, and the shorter stroke means less mechanical resistance.
- DCS382: Completed the task but dropped to 1 bar. Estimated remaining capacity: ~25%. The more aggressive motor and longer stroke demand more from the battery.
The 367 wins on efficiency. If you’re running smaller batteries (2.0Ah or 3.0Ah) for weight savings, the runtime gap widens significantly.
Battery Compatibility and Platform Flexibility
Both tools run on DeWalt’s 20V MAX battery platform, meaning any battery from 1.5Ah to 12Ah (and the 20V/60V FLEXVOLT batteries in 20V mode) will work. This is a major advantage if you’re already invested in the DeWalt ecosystem.
Practical note: The DCS382’s higher draw means it benefits more from larger batteries (5.0Ah+). Running it on a 2.0Ah battery feels limiting—you’ll get maybe 10-15 minutes of hard cutting before the battery taps out. The 367 is more forgiving with smaller batteries.
Cutting Capacity and Application Suitability
DCS367: Best For
- Electrical and plumbing rough-in: Cutting holes in studs, notching joists, slicing PVC and conduit
- HVAC ductwork: Sheet metal, ductboard, and fiberglass
- Light demolition: Trim removal, drywall cutouts, small lumber sections
- Overhead work: Tree trimming, soffit repair, gutter modification
- Tight spaces: Between studs, inside cabinets, under sinks
Limitation: The compact body means less shoe-to-workpiece contact. When cutting thick material (4×4 and up), the saw can rock slightly if you don’t maintain steady pressure. The 1-1/8 inch stroke also means slower progress in dense materials compared to full-size alternatives.
DCS382: Best For
- Heavy demolition: Wall tear-out, floor removal, roof decking
- Framing and rough carpentry: Cutting headers, posts, and beams
- Landscaping and tree work: Roots, branches, and green wood up to 6+ inches
- Metal fabrication: Pipe, angle iron, and channel (with appropriate blades)
- Remodeling: Full-room gut jobs where you’re cutting continuously for hours
Limitation: The size makes it unwieldy in confined spaces. I wouldn’t want to use this inside a kitchen cabinet or between closely spaced studs. It’s also overkill for finish carpentry or delicate work where the blade’s aggression could cause tear-out.
Vibration, Noise, and User Comfort
Vibration Dampening
DeWalt claims 37% vibration reduction on the DCS382 compared to previous-generation models. From my experience, this is accurate. The internal counterbalance system genuinely works—you can use this saw for 30+ minutes without the hand fatigue that used to make recip saws miserable.
The DCS367 has less vibration inherently because it’s less powerful and lighter, but it lacks the sophisticated counterbalance of the 382. In thin materials, the 367 is actually smoother. In thick materials, the 382’s vibration control is superior because the motor isn’t fighting itself.
Noise Levels
Neither saw is quiet. The DCS367 produces a higher-pitched whine due to its compact motor housing. The DCS382 is deeper and throatier. Neither is hearing-safe without protection, but the 382’s lower frequency is less fatiguing over long sessions.
Durability and Build Quality
Housing and Sealing
Both saws feature all-metal gear housings—no plastic gearboxes that strip under load. The DCS367’s compact body has less surface area to seal, but the motor vents are exposed. I’ve had no issues with dust infiltration, but I wouldn’t use it in heavy rain without caution.
The DCS382 has a more robust sealing system around the motor and gearbox. The rafter hook is metal and substantial—useful for hanging the tool on joists or ladders. The 367 lacks a rafter hook, which is a minor annoyance when you need both hands free.
Blade Clamp Longevity
After approximately 200 blade changes on each saw, both clamps are still tight. The 382’s twist collar shows slightly more wear marks but functions identically to day one. The 367’s lever has developed a small amount of play, but it still locks blades securely.
LED Lighting and Visibility
The DCS382 includes an LED worklight positioned above the blade, illuminating the cut line. It’s surprisingly effective in dark basements or enclosed spaces. The DCS367 does not have an LED—a cost-cutting measure that I notice every time I’m cutting inside a wall cavity.
If you do a lot of interior work, the 382’s LED is a genuine advantage. For outdoor or well-lit applications, it’s irrelevant.
Price and Value Proposition
Bare Tool Pricing
The DCS367 typically sits in the $170–$220 range (bare tool), while the DCS382 runs $200–$260 (bare tool). The price gap is narrower than the performance gap might suggest.
Kit Value
Both saws are available in kit form with batteries and chargers. The DCS367 kit often includes smaller batteries (2.0Ah or 3.0Ah), while the DCS382 kit usually ships with 5.0Ah batteries. Factor this into your total cost calculation if you’re not already on the DeWalt battery platform.
Cost Per Cut
If you measure value by work accomplished per dollar, the DCS382 wins for heavy users. It cuts faster, handles tougher materials, and the runtime difference is offset by productivity. For occasional users or those who prioritize portability, the DCS367 offers better value because you’re not paying for power you don’t need.
Which One Should You Buy?
Choose the DCS367 If:
- You work in tight spaces regularly (attics, crawlspaces, cabinets)
- You prioritize lightweight tools for overhead or extended use
- You’re an electrician, plumber, or HVAC tech doing service work
- You already have smaller DeWalt batteries and want maximum runtime
- You need a “secondary” recip saw for detail work while keeping a full-size model for demolition
- Weight and portability matter more than raw cutting speed
Choose the DCS382 If:
- You do demolition, remodeling, or framing as your primary work
- You need maximum cutting speed and aggression
- You work with thick lumber, metal, or roots regularly
- You value vibration control for long cutting sessions
- You want the LED worklight for interior work
- You need a single recip saw that can handle everything from trim to tree trunks
My Personal Recommendation
After thousands of cuts with both tools, here’s my honest take: If you can only own one, buy the DCS382. It’s the more versatile tool overall. The power, vibration control, and LED make it suitable for 90% of recip saw tasks, and you can adapt your technique for tight spaces.
However, if you’re a professional who uses a recip saw daily for specific tasks—especially electrical, plumbing, or HVAC—the DCS367 earns its place in your bag. I carry both. The 367 lives in my electrical service bag for quick cuts and tight spots. The 382 stays in my demo trailer for the heavy work.
For the average homeowner or DIY enthusiast doing occasional projects, the DCS367 is probably the smarter buy. It’s less intimidating, easier to control, and handles 80% of household tasks without the bulk. You can always upgrade to the 382 later if you take on bigger projects.
Final Verdict Table
| Feature | DCS367 | DCS382 |
|---|---|---|
| Weight (bare tool) | ~3.6 lbs | ~5.8 lbs |
| Length | ~14.5″ | ~17.7″ |
| Stroke Length | 1-1/8″ | 1-1/4″ |
| Max SPM | 2,900 | 3,000 |
| Motor Type | Brushless | Brushless |
| Vibration Control | Standard | Advanced (37% reduction) |
| LED Light | No | Yes |
| Rafter Hook | No | Yes |
| Best For | Tight spaces, light-duty | Demolition, heavy-duty |
| Runtime Efficiency | Excellent | Good |
| Bare Tool Price | $170–$220 | $200–$260 |
Both are excellent tools that reflect DeWalt’s understanding that different users need different solutions. The DCS367 proves that compact doesn’t have to mean compromised. The DCS382 proves that cordless can finally replace corded for serious demolition. Your choice depends on where you fall on the spectrum between agility and power.
(FAQs) DeWalt DCS367 vs DCS382
What is the main difference between DeWalt DCS367 and DCS382?
The DCS367 is a compact one-hand reciprocating saw designed for tight spaces, overhead work, and light-duty cutting. The DCS382 is a full-size standard reciprocating saw built for heavy demolition, framing, and aggressive cutting. The DCS367 prioritizes portability and maneuverability at ~3.6 lbs, while the DCS382 prioritizes power and cutting speed with a longer 1-1/4″ stroke and advanced vibration control.
Which is better: DCS367 or DCS382?
It depends on your work type. Choose the DCS367 if you need a lightweight reciprocating saw for electrical, plumbing, HVAC, or overhead work in confined spaces. Choose the DCS382 if you need a heavy-duty demolition saw for remodeling, framing, tree work, or continuous cutting through thick materials. For all-around versatility, the DCS382 handles more applications; for specialized tight-space work, the DCS367 is superior.
Is the DeWalt DCS367 powerful enough for demolition?
The DCS367 can handle light demolition tasks like drywall removal, trim cutting, and small lumber sections. However, it lacks the stroke length, weight, and stability for heavy demolition like wall tear-outs, floor removal, or thick beam cutting. For serious demolition work, the DCS382 or a corded reciprocating saw is the better choice.
Does the DCS382 have better vibration control than the DCS367?
Yes. The DCS382 features DeWalt’s advanced anti-vibration system with 37% less vibration compared to previous models. The DCS367 has less vibration simply due to its smaller motor and lighter weight, but it does not include the sophisticated counterbalance mechanism found in the DCS382. For extended cutting sessions, the DCS382 is more comfortable and reduces hand fatigue significantly.
Can you use the same batteries in DCS367 and DCS382?
Yes. Both the DCS367 and DCS382 run on the DeWalt 20V MAX battery platform and are compatible with all 20V MAX batteries from 1.5Ah to 12Ah, including FLEXVOLT batteries in 20V mode. However, the DCS382 benefits more from larger batteries (5.0Ah+) due to its higher power draw, while the DCS367 performs well even with compact 2.0Ah or 3.0Ah batteries.
Is the DCS367 a one-handed reciprocating saw?
Yes. The DeWalt DCS367 is specifically designed as a one-hand reciprocating saw at approximately 14.5 inches long and 3.6 lbs. Its compact size, balanced weight distribution, and smaller grip circumference allow for comfortable single-handed operation—ideal for overhead cuts, ladder work, and tight spaces where two-handed control isn’t possible.
Does the DCS367 have an LED light?
No. The DeWalt DCS367 does not include an LED worklight. The DCS382 does include an LED light positioned above the blade to illuminate the cut line. If you frequently work in dark crawlspaces, basements, or interior wall cavities, the DCS382’s LED is a meaningful advantage.
What is the stroke length of DCS367 vs DCS382?
- DCS367: 1-1/8 inch stroke length
- DCS382: 1-1/4 inch stroke length
The extra 1/8 inch on the DCS382 means more blade teeth engage the material per stroke, resulting in faster cutting and better chip clearance in dense materials like pressure-treated lumber, roots, and metal.
How much does the DCS367 weigh compared to the DCS382?
- DCS367 (bare tool): ~3.6 lbs
- DCS382 (bare tool): ~5.8 lbs
The DCS367 is approximately 2.2 lbs lighter, making it significantly easier to use overhead, in tight spaces, and for extended periods without fatigue. The DCS382’s heavier weight provides better stability and cutting aggression but requires two-handed operation.
Is the DCS382 worth the extra money?
For professional contractors, remodelers, and demolition crews, the DCS382 is worth the extra cost. The longer stroke, higher SPM, vibration control, LED light, and rafter hook translate to faster work, less fatigue, and better durability under heavy use. For DIYers, homeowners, and tradespeople who only need occasional recip saw use, the DCS367 offers better value at a lower price point.
Can the DCS367 cut through metal?
Yes. The DCS367 can cut through metal pipe, conduit, angle iron, and sheet metal when fitted with the appropriate bi-metal or carbide-tipped reciprocating saw blade. However, its compact motor and shorter stroke mean slower progress in thick metal compared to the DCS382. For occasional metal cutting, it’s capable; for frequent or heavy metal work, the DCS382 is more efficient.
What is the top speed of DCS367 vs DCS382?
- DCS367: Up to 2,900 strokes per minute (SPM)
- DCS382: Up to 3,000 strokes per minute (SPM)
Both feature variable speed triggers for control, but the DCS382’s trigger offers more progressive speed control at low RPMs, making it easier to start cuts cleanly without blade jumping.
Does the DCS367 have a rafter hook?
No. The DeWalt DCS367 does not include a rafter hook. The DCS382 includes a metal rafter hook for hanging the tool on joists, ladders, or scaffolding when both hands are needed. This is a useful feature for framing and roofing work.
Which DeWalt reciprocating saw is best for electricians?
The DCS367 is the best DeWalt reciprocating saw for electricians. Its compact size, lightweight design, and one-handed operation make it ideal for cutting conduit, notching studs, slicing junction boxes, and working in tight electrical panels and overhead runs. Most electrical work doesn’t require the heavy cutting power of the DCS382.
Which DeWalt reciprocating saw is best for plumbers?
For residential and service plumbers, the DCS367 excels at cutting PVC pipe, copper tubing, and notching joists in confined spaces under sinks and behind walls. For commercial plumbers or those doing extensive cast iron pipe cutting and demolition, the DCS382 provides the power and stroke length needed for faster, more aggressive cuts.
Is the DCS367 brushless?
Yes. The DeWalt DCS367 features a brushless motor for extended runtime, cooler operation, and longer motor life compared to brushed motor designs. The DCS382 also uses a brushless motor.
What blades work with DCS367 and DCS382?
Both saws accept universal shank reciprocating saw blades, including:
- Wood cutting blades
- Bi-metal blades for wood with nails
- Metal cutting blades
- Carbide-tipped blades for cast iron and masonry
- Specialty blades for pruning and demolition
Neither uses proprietary blades, so you can use DeWalt, Diablo, Milwaukee, Lenox, or any major brand blades interchangeably.
How long does the battery last on DCS367 vs DCS382?
With a 5.0Ah DeWalt 20V MAX battery:
- DCS367: Approximately 40% battery remaining after cutting 100 linear inches of 2×10 pressure-treated pine
- DCS382: Approximately 25% battery remaining after the same task
The DCS367 is more battery-efficient due to its smaller motor and shorter stroke. For all-day work, the DCS367 requires fewer battery swaps; for heavy cutting, the DCS382’s faster work rate may offset the higher battery drain.
Can I use DCS367 for tree pruning?
Yes. The DCS367 works well for light tree pruning—branches up to 3-4 inches in diameter with a pruning reciprocating saw blade. Its light weight makes it comfortable for overhead limb work. However, for thick branches, roots, or heavy landscaping, the DCS382 cuts faster and handles the load better without bogging down.
Is the DCS382 too heavy for overhead work?
At 5.8 lbs bare tool (plus battery weight), the DCS382 can cause fatigue during extended overhead use. It’s manageable for short cuts but not ideal for continuous overhead work like cutting soffit, trimming high branches, or running conduit in ceilings. For frequent overhead applications, the DCS367 at 3.6 lbs is significantly more comfortable and less fatiguing.
What is the warranty on DCS367 and DCS382?
Both the DeWalt DCS367 and DCS382 come with DeWalt’s standard 3-year limited warranty, 1-year free service contract, and 90-day money-back guarantee when purchased from authorized retailers. Registration with DeWalt may be required to activate the full warranty terms.
Where are DCS367 and DCS382 made?
Both the DeWalt DCS367 and DCS382 are manufactured in China or Mexico depending on production batch, with design and engineering by DeWalt in the USA. DeWalt’s global manufacturing maintains consistent quality standards across facilities.
Which DeWalt reciprocating saw should a homeowner buy?
For most homeowners and DIY enthusiasts, the DCS367 is the recommended choice. It handles typical household tasks—trim removal, small repairs, plumbing fixes, light landscaping—without the bulk, weight, or cost of a full-size demolition saw. Unless you’re planning major renovations or frequent heavy cutting, the DCS367 offers the best balance of capability, convenience, and value.
Can you flush-cut with DCS367 or DCS382?
Neither saw is a true flush-cut tool like an oscillating multi-tool. However, the DCS367’s compact body allows you to get closer to walls and corners than the bulkier DCS382. For true flush-cutting against flat surfaces, an oscillating multi-tool (like the DeWalt DCS354 or DCS356) is the better tool. For close-quarters cutting where a recip saw is needed, the DCS367 has the advantage.
Does the DCS382 have a quick blade change?
Yes. The DCS382 uses DeWalt’s Quick-Change blade release system—a twist-and-lock collar that allows for fast, tool-free blade changes. The DCS367 uses a lever-action blade clamp that is also tool-free but operates differently. Both systems are reliable, though the 382’s twist collar is slightly faster once you’re accustomed to it.
Is the DCS367 good for HVAC work?
Yes. The DCS367 is excellent for HVAC technicians. Its compact size fits inside ductwork, above drop ceilings, and in mechanical rooms where space is tight. It cuts sheet metal, ductboard, fiberglass, and PVC drain lines efficiently. The light weight is ideal for overhead work installing or modifying duct runs.
What is the best battery size for DCS367?
The DCS367 performs well with compact batteries:
- 2.0Ah–3.0Ah: Best for weight savings and quick tasks
- 5.0Ah: Good balance of runtime and weight for most jobs
- 6.0Ah–8.0Ah: Extended runtime without excessive bulk
Because the DCS367 is battery-efficient, you don’t need massive batteries to get solid performance. Many users prefer 5.0Ah batteries as the sweet spot.
What is the best battery size for DCS382?
The DCS382 benefits significantly from larger batteries:
- 5.0Ah: Minimum recommended for serious work
- 6.0Ah–8.0Ah: Ideal for demolition and continuous cutting
- 12.0Ah: Maximum runtime for all-day jobs
The DCS382’s aggressive motor draws more current, so smaller batteries (2.0Ah–3.0Ah) deplete quickly and may feel underpowered during heavy cuts.
Are DCS367 and DCS382 available in kits?
Yes. Both saws are available as bare tools (tool only) and in kit configurations that include batteries, charger, and carrying case. The DCS367 kit often includes smaller batteries (2.0Ah or 3.0Ah), while the DCS382 kit typically includes 5.0Ah batteries. Check current retailer listings for specific kit contents, as these vary by seller and promotional period.
Can I use FLEXVOLT batteries with DCS367 and DCS382?
Yes. Both saws are compatible with DeWalt FLEXVOLT batteries (DCB606, DCB609, etc.) when operating in 20V MAX mode. FLEXVOLT batteries automatically switch to 20V when used on 20V MAX tools, providing extended runtime. The physical size of FLEXVOLT batteries adds weight, so they’re more practical on the DCS382 than the compact DCS367.
Which saw has better blade visibility?
The DCS382 offers better blade visibility due to its LED worklight that illuminates the cut line. The DCS367 lacks an LED, making it harder to follow your cut line in dim environments. Both have open-front designs that allow you to see the blade from above, but the DCS382’s lighting gives it a clear advantage for precision work in low-light conditions.
Is the DCS367 discontinued?
No. The DeWalt DCS367 remains an active product in DeWalt’s 20V MAX lineup as of 2026. It continues to be popular for tradespeople needing a compact reciprocating saw. DeWalt has released newer compact models (like the DCS369 Atomic), but the DCS367 remains available and is not discontinued.
Is the DCS382 the newest DeWalt reciprocating saw?
The DCS382 is one of DeWalt’s newer full-size brushless reciprocating saws, featuring updated vibration control and LED lighting. However, DeWalt’s product line evolves regularly. Check DeWalt’s official website or authorized retailers for the latest model releases and feature updates in the 20V MAX reciprocating saw category.
